Step-by-Step Guide
Sukabumi Green Stone Installation Guide
We strongly recommend an installer experienced with natural stone, particularly for pool applications where slope, waterproofing and grout spacing are critical — this guide can also be shared directly with your chosen contractor.
- 01
Substrate Preparation
Ensure the concrete substrate is fully cured, clean, and free of debris. Prime if required for the adhesive system chosen.
- 02
Dry-Lay Your Pattern
Dry-lay tiles or pavers first to confirm layout, cuts and grout spacing before committing adhesive.
- 03
Apply Adhesive
Use a polymer-modified thin-set adhesive rated for natural stone and exterior/wet-area use — standard ceramic-only adhesive can fail to bond adequately.
- 04
Set the Stone
Set tiles or pavers with appropriate grout spacing (typically 3-10mm depending on format and finish edge variation).
- 05
Grout
Grout once adhesive has cured per manufacturer instructions, using a grout suited to natural stone.
- 06
Seal
Apply a breathable penetrating sealer once grout has fully cured — this is the step most commonly skipped, and the one that most affects long-term performance.
Installation FAQ
Does Sukabumi Green Stone need sealing?
Yes, we recommend sealing with a breathable penetrating sealer at installation and on a periodic maintenance schedule — this reduces staining, water absorption and algae susceptibility without trapping moisture in the stone.
How is Sukabumi Green Stone installed?
Installation follows standard natural stone tiling practice: substrate preparation, thin-set adhesive application, tile/paver setting with appropriate grout spacing, grouting, and finally sealing — our full installation guide walks through each step in detail.
What adhesive is used for Sukabumi Green Stone?
A polymer-modified thin-set adhesive rated for natural stone and exterior/wet-area use is recommended; avoid standard ceramic-only adhesives, which can fail to bond adequately with denser natural stone in submerged pool applications.
Can Sukabumi Green Stone be installed over concrete?
Yes — concrete is the most common substrate for pool decks, coping and paving applications, provided the slab is properly cured, cleaned and, where needed, primed before adhesive application.
Do I need a professional installer for Sukabumi Green Stone?
We strongly recommend an installer experienced with natural stone, particularly for pool applications where correct slope, waterproofing and grout spacing are critical to long-term performance — our installation guide can also be shared with your chosen contractor.
What is the correct grout spacing for Sukabumi Green Stone tiles?
Grout spacing is typically specified between 3-10mm depending on tile format and the natural edge variation of the finish chosen (natural cleft edges generally need wider joints than precision-cut honed tiles) — full guidance is in our installation guide.
Can Sukabumi Green Stone be installed on vertical walls?
Yes — cladding panels and veneer-format cuts are specifically produced for vertical wall and facade applications, using mechanical fixing or adhesive systems rated for the panel weight and substrate.
How long does installation take?
Timeline depends on project size and installer crew size; a typical residential pool deck/coping installation runs from a few days to two weeks including substrate prep, curing time, grouting and sealing.
Planning an Installation?
Share your project details and we'll help you plan quantities, tools and finish selection.